TMF Servo Trunnions

  • TMF Servo Trunnions 2000
    Max. # of Cycles/min (max. input speed) (rpm)
    350
     
    Precision (mm)* At outside diameter of dial plate
    ±0.015 / ø560
     
    Precision in Angular Seconds (“)*
    ±11.05
     
    Axial Force on Output Flange (kN)
    728
     
    Radial Force on Output Flange (kN)
    343
     
    Tilting Moment on Output Flange (kNm)
    207.5
     
    • TMF 2000
      TMF 2000
      TMF 2000
  • TMF Servo Trunnions 3000
    Max. # of Cycles/min (max. input speed) (rpm)
    350
     
    Precision (mm)* At outside diameter of dial plate
    ±0.018 / ø800
     
    Precision in Angular Seconds (“)*
    ±9.28
     
    Axial Force on Output Flange (kN)
    965
     
    Radial Force on Output Flange (kN)
    454
     
    Tilting Moment on Output Flange (kNm)
    357
     
    • TMF 3000
      TMF 3000
      TMF 3000
  • TMF Servo Trunnions 4000
    Max. # of Cycles/min (max. input speed) (rpm)
    300
     
    Precision (mm)* At outside diameter of dial plate
    ±0.025 / ø1000
     
    Precision in Angular Seconds (“)*
    ±7.58
     
    Axial Force on Output Flange (kN)
    1.185
     
    Radial Force on Output Flange (kN)
    590
     
    Tilting Moment on Output Flange (kNm)
    525
     
    • TMF 4000
      TMF 4000
      TMF 4000
  • TMF Servo Trunnions 5000
    Max. # of Cycles/min (max. input speed) (rpm)
    300
     
    Precision (mm)* At outside diameter of dial plate
    ±0.025 / ø1,360
     
    Precision in Angular Seconds (“)*
    ±7.58
     
    Axial Force on Output Flange (kN)
    1,649
     
    Radial Force on Output Flange (kN)
    776
     
    Tilting Moment on Output Flange (kNm)
    1,063.5
     
    • TMF 5000
      TMF 5000
      TMF 5000
  • TMF Servo Trunnions 8000
    Max. # of Cycles/min (max. input speed) (rpm)
    200
     
    Precision (mm)* At outside diameter of dial plate
    ±0.04
     
    Precision in Angular Seconds (“)*
    ±6.60
     
    Axial Force on Output Flange (kN)
    4,755.5
     
    Radial Force on Output Flange (kN)
    2,237.9
     
    Tilting Moment on Output Flange (kNm)
    1,850
     
    • TMF 8000
      TMF 8000
      TMF 8000
1 2 3 4 5
 

The TMF Series Rotary Index Table Servo Trunnion was engineered to satisfy the needs of the 21st century industrial manufacturing environment: fast, strong, reliable, high quality and cost effective. The TMF Series Flexible Rotary Index Table Trunnion features a cast housing that is compact and has all the characteristics a manufacturer looks for: large center thru-hole for running utilities and mounting equipment, very low profile to eliminate the need for large A-frame type tooling or operator riser platforms, and a large rotating diameter for increased mounting surface. In order to increase the strength of the index table, the TMF Series was designed to be a completely programmable solution. This allows for a minimum of 4 oversized cam followers to be engaged with the barrel cam at all times. The indexer is driven directly via a gear motor that can utilize either an AC motor with encoder or servo. Both options provide very high accuracy (less than 10 arc seconds) and allow for the indexer to be driven via a dedicated or robot drive. Loading capabilities are multiplied significantly in this line of indexers through the design of the barrel cam and cam followers. This unique design allows for unprecedented inertial load capability.

Advantages for design engineers and special machine builders

  • Large center thru-hole which is large enough to feed entire shafts through, and not just small wiring looms
  • Dowel holes in housing and in output flange
  • Recessed center column – No obstruction
  • Lengthened and machined to customer requirements
  • Simultaneously rotating input shaft extension
  • Optional synchronization of other mechanical modules

Technical benefits for users

  • Extremely reliable with long service lives
  • High efficiency mechanical components require less input power
  • Flame hardened cams and cam followers
  • Internal components immersed in oil bath
  • Low profile housing for seamless integration
  • Top access to cam followers
  • Redesigned housing for larger center thru-hole
  • Significantly increased strength as a result of integration of more cam followers
  • Inspection of internal components can be done with tooling mounted on top.

Options available

  • Machine bases
  • Reinforced output flange bearing
  • User-controlled stations and timing
  • Clean room ready with MEDEX Index Drives
  • Custom dial plates or frames
  • More Options

Industry Examples

Industrial Machines
Automotive

Request More Information

We value your privacy - all information you have provided is considered strictly confidential.

Related Products